1/2″ AR550 6″ Diameter Gong

$35.00

Grab some gong targets today to add some versatility and smaller targets to your shooting range. Gong Targets include (2) 1/2″ grade 8 carriage bolts and (2) lock nuts with each gong. Gong Targets ship for free in the United States.

Description

These 1/2″ AR550 gongs can be used with handguns up to magnum caliber rifles. Pistol calibers should be used at 10 yards minimum. .223/5.56 may be used as close as 30 yards from the gong. Calibers larger than .223/5.56 up to and including .308 winchester must be used at 50 yards or more. Anything larger than a .308 should be used at 100 yards. This is the same steel that makes up our legendary .50 caliber rated Goliath Target.

Please note: Proper hanging must be used for these targets. Targets must be able to swing when struck to absorb impact like our A-DAP system. Because we cannot ensure proper mounting by customers, distance recommendations may need extended to avoid target damage. Customers must shoot a few test rounds after hanging and must inspect gong target face for deformation or pits before continuing to shoot. If marking, pitting, dimpling occur, increase distance until they no longer occur.

For complete silhouette systems look at our A-DAP target system.

Mount Type Customer Supplied (rubber straps recommended)
Steel Grade 1/2″” AR550 Steel
Assembly Some Tools May Be Required
Adjustable Lean? Yes, depending on customer mounting method
Holes? (2) 9/16″ Square holes for 1/2″ Carriage Bolts
Approximate Height 10″
Paddle Width 10″
Uses Competition, Training, Transitions, Shooting and Moving
Finish Ships Unpainted
  • Pistol Use (9mm, .40, .45) 10 yards minimum
  • Rifle Use: Up to .223/5.56 NATO & .300 Blackout 30 Yards Minimum AFTER testing mounting method and inspecting for damage
Customer Reviews
Rated 0 out of 5
Based on 0 review(s)
Write a review

There are no reviews yet.