.394 AR550 C Zone Steel Target (SALE) - TA Targets
Sale!

.394 AR550 C Zone Steel Target (SALE)

$299.00

Lead Time on this product: *WHAT IS SHOWN IS IN STOCK, HOWEVER LONGER LEAD TIMES MAY BE EXPERIENCED DUE TO VOLUME

-

Take advantage of our Labor Day special here. Save money, get to training with purpose. *Cannot be combined with other codes or offers*

The A-DAP System is a C Zone target system that is manufactured from our AR550 steel. This system is available in both 3/8″ and 1/2″ AR550, and our 1/2″ AR550 version features our LIFETIME warranty. No other company offers that.

Each and every target plate is manufactured from our hand selected AR550 that meets our minimum hardness requirements. We track each and every plate and place a serial number and lot number behind the CNC formed angles behind the target plate.

The C Zone A-DAP target was designed specifically to be our most durable, loudest ringing steel target in our lineup. The C Zone shaped plate is approximately 12″Wx24″H. This size is widely accepted in the competitive, training, and law enforcement world and is used for qualifications all over the globe. The C Zone A-DAP is our loudest ringing target and can be easily heard when struck, even over 1000 yards away.

If you are on the hunt for a C Zone target system, consider the A-DAP system today. Purchase in 1/2″ AR550 and you will have a system that is backed by our lifetime warranty. We stand by you, our customer, because we need you to be a part of this movement. We need our communities training to higher standards.

 

 

53 in stock

Description

What makes the A-DAP family of targets so special?

The C Zone steel target A-DAP system features nearly 45 degrees of forward lean. The target plate will also move when struck. Couple these two traits together and you have a system that sends fragmentation to the ground, not at your face. No other system is as versatile as the A-DAP family of steel targets. This .394″ Thick plate was special purchased by our team to offer a limited run of C Zone’s from this material. This material will be a slight increase in strength over 3/8″ without the weight increase of 1/2″ AR550. We have a LIMITED amount of these available at a discount.

Why Choose the C Zone A-DAP system over others?

The C Zone Steel target is a classic shape and size and our A-DAP design is EXTREMELY audible when struck. Our C Zone target can easily be heard over 1000 yards in good conditions. The C Zone shape and size is also a very commonly accepted size among trainers and departments, so it is widely used and accepted. The Aggressive forward lean and movement of our A-DAP family of targets creates the safest, loudest, most reliable targets on the market. Buy with confidence and support a company that is a 2A absolutist, committed to changing culture and building communities.

How portable is the C Zone A-DAP system?

The C Zone A-DAP steel target system is extremely portable. The plate, top bracket, and base can be easily broken down. The entire system can fit easily into even the most compact of vehicles. Although this steel target is extremely portable, it is also extremely stable.

Manuals and Instructions: Please visit our Manuals and Instructions page.

Mount Type A-DAP 2.0 Top Bracket (Or Armored Post)
Steel Grade .394″ AR550 Steel (Metric Plate Thickness)
Assembly Fast, Tool-Less Assembly
Adjustable Lean? Yes. 7 Angles of Adjustment Available Standard
Brackets Laser Cut, CNC Press Brake Formed to Perfect Angles
Approximate Height 24″
Approximate Width 12″
Shape C Zone Target Plate
Finish Painted
  • Extremely durable and stable 20″ round base standard with the option to upgrade to our Arachnid Armored Base.
  • Standard Tool-less construction, just like our other A-DAP targets
  • .394″ Thick plate is manufactured from AR550 steel. This is a LIMITED Supply. Thicker than 3/8″ for some more added durability, but still lighter than 1/2″ AR550 plates. These plates fall under our 3/8″ AR550 warranty.
  • Target Plate Dimensions: Approximately 12″ Wide x 24″ Tall
  • Bolts are our standard GRADE 8 Carriage bolts
  • This system features our newest adjustable lean brackets for optimum target lean for various uses and distances. Please note: we recommend purchasing the steel armored post if you desire to use the steepest hole location with the C Zone plate. 
  • .394″ AR550 version: Rated for pistols at 10 yards, .223 at 50 yards, 308 at 50 yards, larger calibers 100 yards. *NOTE: Distances are determined with lead core, copper jacketed ammo at 3,000 FPS muzzle or LESS. Faster ammunition may require further distances.
  • Please watch our video on this page where we discuss choosing the proper ammunition for your steel target prior to shooting your steel target.
  • Approximate weight of complete system in 3/8″ AR550 is 56 pounds, approximate weight of complete system in 1/2″ AR550 is 65 pounds.
  • Ships in a 24″x24″X6″ box
  • Base not intended to withstand bullet impacts
  • Not intended for steel core or penetrator ammunition
  • We see your team shooting these targets much closer than recommended? Can we shoot closer? 
    • Answer: Negative. Much of what we do is substantial abuse testing for QC and R&D of new and existing systems. Always follow our recommended distances for training. While shooting closer often does not pose a safety threat, it is harder on the systems. Users will potentially increase wear and tear with leads to unsafe targets when misused.
  • Does this system feature adjustable lean angles? 
    • Answer: Yes. Our CNC formed brackets offer several levels of lean. The steepest setting (bottom hole) allows nearly 45 degrees of forward lean.
  • Does this system work with my current hostage assembly? 
    • Answer: YES! The Mini A-DAP works with ALL A-DAP system accessories, including the hostage, armored posts, arachnid base.
  • Is this system covered under your warranty?
    • Answer: Yes! Any of our .394″ AR550 systems have a 1 year strike plate warranty. If something cracks or breaks prematurely, we’ll replace it so long as it was used properly. We take immense pride in how we treat and stand by customers. This system is absolutely no different. You are purchasing the highest quality systems from us and they will perform as such. 1/2″ AR550 systems feature our lifetime warranty. For FULL details please see our warranty page on the site.
  • I already have a base and A-DAP top bracket or armored post, can I buy the C Zone A-DAP target plate separately? 
    • Answer: No. This limited run C Zone is ONLY Available as a complete system.
  • Where are these products produced? 
    • Answer: We produce our products in Lancaster County PA. We oversee every step of the process, QC, production, packaging, and shipping. From start to finish, TA Targets is manufacturing high quality systems for hard use. Our owners own the machinery, facility, equipment, etc. We have invested heavily in newer specialty equipment to further streamline our processes and increase quality even further.
  • Is the Armor Plating on the targets US material?
    • Answer: No. The “armor” we use for the strike plates (actual target impact plates) is made from a proprietary material that is manufactured in Sweden. this is the best material we have found in the world. We were largely dissatisfied with the QC of American made strike plates and had too many issues with quality control. Eventually we hope a US manufacturer creates a material that is as available and as stringent as our Swedish plate. For now, this is the best material to service our customers. US Manufactured AR500 and AR550 is used in areas that are NOT main strike plates. Some examples of this are the Rifle Dueling Tree Shields, Plate Rack Shields, Arachnid front shield and hostage brackets.
  • Where does the rest of the steel come from?
    • Answer: Traditionally all other steel used in our systems is US origin. During the “covid pandemic” the supply chain has experienced extreme pressures. Under some circumstances some of our tube steel and angle had to be purchased from Canadian raw materials. We do our absolute best to minimize this, not because of quality concerns, but because we deeply desire to produce our products from US steel. We will not use Chinese steel plate, angles, or tubes. Rest assured.
Customer Reviews
Rated 0 out of 5
Based on 0 review(s)
Write a review

There are no reviews yet.