Description
VTAR Popper Plate Hardware
The VTAR Popper Plate Hardware kit is designed to replace worn out or lost hardware on our popper target plates. This kit will work with our first generation VTAR poppers as well as our Second Generation poppers. Over time the Grade 8 carriage bolts will wear out and will need replaced. This get gets you the bolts, nuts, and washers needed to keep the VTAR plates in operation. Lock nuts should also be replaced anytime they are removed. They only “Bite” into the bolts during the first use, so they need replaced when bolts are replaced. To install the lock nuts you will need a 3/4″ open end wrench
This kit does NOT include the components for the Gen 2 VTAR popper base. You can find that kit HERE.
Included in this hardware kit:
- (4) 1/2″ Grade 8 Carriage bolts for VTAR target plate
- (4) 1/2″ flat washers for behind angles bolted to VTAR plate
- (4) 1/2″ Lock Nuts for bolts
- NOTE: This kit DOES NOT include components for the VTAR Base and it also does not include the angles for the target plate
For customers looking for a complete replacement base, look no further than HERE. For our complete VTAR target system, look HERE.
